Showing 280–290 of 325 results

Access monitoringDetect access by unauthorized personnel via door switch.Transformer-block spaced outletsProtect equipment with input transformer blocks without blocking access to other receptacles.Sleek designSlim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.Cold-start capableProvides temporary battery power when the utility power is out.Boost Automatic Voltage Regulation (AVR)Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenanceAdvanced Safety FeaturesSafeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.Battery backup and surge protectionOutlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.Battery and surge protected outletsBack up and protect your hardware and data during power outages, surges and spikes.LED IndicatorsProvide easy-to-read status of the unit and utility power conditions.Audible alarmsProvides notification of changing utility power and UPS power conditions

Battery backup and surge protectionOutlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.Battery and surge protected outletsBack up and protect your hardware and data during power outages, surges and spikes.Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.Boost Automatic Voltage Regulation (AVR)Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.Cold-start capableProvides temporary battery power when the utility power is out.Sleek designSlim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.Transformer-block spaced outletsProtect equipment with input transformer blocks without blocking access to other receptacles.LED IndicatorsProvide easy-to-read status of the unit and utility power conditions.Audible alarmsProvides notification of changing utility power and UPS power conditions.Advanced Safety FeaturesSafeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenanceIntelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.

BVS480XDPDR 24V DC UPS – 480Watt, 24V, 20A, DIN-Rail mounting, Power Module without batteryProtectyour investment and prevent data loss with the new 480Watt 24V DC DIN-rail mounted industrial UPS from Schneider Electric, which provides reliable surge protection and battery backup during power failures in an industrial environment.This Schneider Electric Industrial UPS enables machine builders and system integrators to:efficiently manage their automation equipment in the event of a power failure.Separate batteryThe BVS480XDPDR power module is equipped with DC input/output terminals to support PLCs and HMIs, and must be equipped with a minimum of one and a maximum of four XB005XPDR runtime batteries. This allows up to one hour of bridging time during power failures under full load. See runtime table for more details. The Industrial DC DIN Rail UPS comes with relay contact terminals that enable remote management of connected equipment and monitoring of the UPS.Why consider Schneider Electric Industrial UPS?-Minimize downtime and protect investments-Helps reduce machine maintenance by enabling safe shutdown of equipment during a power failure and eliminating the need to reset automation machines.-Gain better control over your industrial infrastructure with remote monitoring and management via relay contacts, external battery backup and LED indicators.Key features-24 DC inputConnect the right AC/DC or DC/DC power supply for your application.-24 DC outputDesigned to support industrial equipment such as PLCs, HMIs, industrial PCs that require a 24V DC power supply.-Relay contactsShutdown and manage connected equipment via potential dry contacts.-Expandable battery capacityExtend runtime up to 4 batteries (XB005XPDR).-On/Off buttonRemotely turn the UPS on or off when needed.-2-year warrantyPeace of mind with a 2-year warranty.-LED indicatorsCheck the UPS status using LEDs that change from green to red when an event occurs.

At 2700W/3000VA this Smart-UPS On-Line Lithium-Ion battery backup system provides high-density, double conversion on-line pure sine wave power. In addition to cleaner, quieter power protection, this UPS is only around half size and weight of comparable UPS systems with similar runtime and has flexible rack and tower installation options. A new extended runtime battery pack provides longer runtime in a small 2U footprint while tripling the life expectancy of the UPS. SRTL 1-3kVA UPSs with this rong runtime battery pack is perfect for applications critical for runtime.

Protect your WiFi, stay onlineThe APC Back-UPS Connect is an uninterruptible power supply (UPS) specifically designed to power compatible routers, modems, VoIP systems, baby monitors, IP cameras and other smart home devices during a power outage. This way you keep your WiFi online and stay connected, even during a power outage.The Back-UPS Connect is a reliable, flexible and affordable 12V DC UPS with lithium-ion battery that guarantees continuity for connected equipment during power outages.Battery capacity and runtimeWith a 7500mAh / 27.75Wh battery, it can provide up to 4 hours* of runtime, depending on the connected equipment. *At a load of 5 Watts.For a further estimate of the runtime, see the runtime table between the product images.ConnectorsInput/Output configurationInput connector Barrel - center pin 2.5 mm; 5525 DC jack (default)Output connector Barrel - center pin 2.5 mm; 5525 DC jack (default)Output cable length 80 cmAdditional DC tips 2.1 mm and 1.7 mm

Stay connected, stay onlineSuffering from a power outage? The APC Back-UPS PRO BGM2200B-GR ensures that your PC, game console, NAS, workstation, but also your WIFI internet (router + modem) continues to function if the power goes out. Thanks to the built-in battery, it immediately supplies emergency power to the connected equipment without interruption. This way you can continue gaming for a while, save your game, avoid penalties or reassure your streamers. If the UPS battery is almost empty, this APC emergency power supply can also automatically shut down a PC, workstation or NAS in time via the USB output and the included PowerChute software. This prevents downtime, loss of your progress and data, as well as damage to your hardware.Thunderstorm? Game on!Stop gaming during a thunderstorm? The APC gaming UPS protects your valuable hardware against peak (surge Max 1080 Joules) and overvoltage (Overcurrent 15A) that can be caused by indirect lightning strikes. With these UPS you can protect both your power and network connections (1Gbit), so you can continue gaming with peace of mind, even during thunderstorms.The APC BGM2200B-GR is also equipped with three USB chargers (type A+C, 3A total) so that you can safely and easily charge your controllers, headset and smartphone.How long can the UPS supply emergency power?You can easily read the expected battery life in the runtime graph, which you can find between the product images. You can easily see how long the UPS supplies emergency power at a certain load.InsuranceDespite the high risk of lightning strikes and surges, APC has full confidence in its products and offers this APC Back-UPS PRO:- Equipment protection policy of 150,000 euros (www.apc.com/nl/en/tools/epp/)UPS battery broken?The internal battery cartridge (APCRBC216) can be replaced easily, safely and independently by the user. This without having to switch off the APC BGM2200B-GR or connected equipment. This way you can easily and cheaply extend the lifespan of the APC Back-UPS and the connected equipment remains online.How can I extend the manufacturer's warranty?The factory warranty of the BGM2200B-GR is 3 years and can be upgraded to 6 years with the APC service pack (WBEXTWAR3YR-SP-01).Save on operational costsThe BGM2200B-GR features an adjustable AVR, which extends battery life and maximizes runtime by correcting low and high voltages without discharging the battery. In addition, the UPS has Greenmode, a smart power-saving operating mode that optimally combines efficiency and protection. Furthermore, the emergency power supply has 6 sockets: 3x backup power & over- and peak voltage protection, 3x over- and peak voltage protection. PowerChute Serial Shutdown software and a USB cable are also included.Gaming UPS Features-Reactor circleThanks to the receding Reactor Circle, equipped with 12 customizable RGB LEDs, the APC emergency power supply informs you at a glance about the remaining runtime and connected load.-160 degreesThe reactor circle screen is angled at 160 degrees, so it is visible from almost any angle.- Functional lightingWhen the Gaming UPS detects a power outage, such as power spikes, dips and even wiring errors, it will notify you with pulsating lights.-12 customizable RGB LEDsMatch with the atmosphere of your gaming platform.-USB chargerEasily accessible USB ports on the front to charge your wireless controllers, headset and smartphone, among other things.-RGB LED on the backThe APC Gaming UPS is equipped with LEDs on the back that illuminate the sockets, so you can see exactly where you connect your gaming equipment. The rear LED colors in sync with the reactor circle and provides an atmospheric glow behind your gaming setup.-Automatic Voltage Regulation (AVR)Maintains safe voltage conditions without using backup battery power, saving backup time for outages when you need them.-1Gb Network Dataline Surge ProtectionNetwork surge protection for telephone, Ethernet and coaxial cable connections. The UPS protects your equipment from "backdoor" surges traveling through data lines without sacrificing internet speed.-Hot-swappable and user-replaceable batteryYou can change the UPS battery yourself easily and quickly without turning off the UPS or switching off the equipment, keeping your equipment online and protected at all times.-The battery only needs 90 minutes to fully charge.-3 year warrantyThis UPS has a three-year manufacturer's warrantyWhat's in the box?APC Back UPS Pro Gaming BGM2200B-GRUSB cableSafety guideManualInput power cord Schuko-C20 1.52M

This APC Back-UPS offers power and surge protection for wireless networks, computers, gaming consoles and other electronics in your home or business. The 500VA floor/wall mount UPS has 8 total outlets, 6 of which are battery back up and surge protection, and 2 that are surge protection only. It has a surge energy rating of 310 Joules. It has one USB port for smart charging of personal devices. This UPS has a 2-year warranty on unit and battery. 3-year warranty, €100,000 lifetime connected equipment protection policy, and free technical support exclusive for European community countries only. It is compatible with a dedicated user-replaceable battery, and the APC replacement battery cartridge helps restore UPS performance to the original specifications.

Accessory solutions to tailor the Smart-UPS to meet your specific needs.