Showing 0–10 of 228 results

The Lindy Multi AV Faceplate is a ready to use single gang wall plate with 10cm trailing leads. This solution provides a neat and tidy AV installation with no soldering required just connect the cables and feed them through the walls.

The Lindy IPower Switch Classic 8 is a power management solution which connects to an existing network infrastructure to provide convenient remote control power management from anywhere in the world with an internet connection. System administrators can control the power of multiple servers, workstations, hubs, router etc. allowing reboot and power-on and off functions, via a simple to use browser interface or software control.Each outlet has its own status indication LED and the display shows the current IP address of the unit directly. Power consumption charts for daily, monthly or a user-defined period are available.This unit has an IEC 320 C19 mains power input connector capable of operating from a 16A circuit. The suggested power cable is a standard mains plug fused at 13A. If you intend to connect the unit to a 16A circuit, then please ensure you use an appropriate 'Commando' style plug to IEC 320 C19 power cable rated at 16A.Note that SSL is not supported. This unit has an IEC 320 C19 mains power input connector capable of operating from a 16A circuit. The suggested power cable is a standard Mains plug fused at 13A. If you intend to connect the unit to a 16A circuit then please ensure you use an appropriate 'Commando' style plug to IEC 320 C19 power cable rated at 16A.Please note: This product is not supplied with the mains power cable. These are available from Lindy using part number30459 (UK Mains to IEC C19)or30109 (Commando to IEC C19).

Cat.5e face plate for network and AV installations! - Low profile socket assembly only 20mm depth required - ideal for shallow pattress boxes - High quality angled terminal block contacts - Accepts 22-26 AWG solid core wire - Dual type terminal blocks (for Krone or 110 IDC professional IDC Professional / IDC low cost punchdown tools) - Dual standard labelling (T568A/T568B colour coding standards) - Faceplate features angled, shuttered sockets to protect against dust - Easy attach ID labels with protective cover - Screws supplied

The Lindy Modular AV Face Plate System allows you to create your own custom face plates by using a combination of Snap-in Blocks and Keystone modules. Fit this F type Keystone into a Keystone Snap-in Block and place into a face plate along side other Keystone and Snap-in modules.   These modules provide a full range of solutions for AV, networking, voice and audio installations. The wide selection of modules and face plates can be custom configured giving you greater control and flexibility.  Additional required products...   Please Note: The Lindy Modular AV Face Plate System must be used in conjunction with Lindy Keystone Snap-in Blocks and Face Plates. Place this Keystone into either a Single Keystone Snap-in Blocks or Dual Keystone Snap-in Blocks which come in packs of four. Then use with a Single Gang Face Plate or Double Gang Face Plate.

RJ4-5 to toolless push down connector,For use with 22-26 AWG CAT6 cable,Can also be used with 110 and Krone punch down tools,Colour: White,2 year warranty,

Cat.5e face plate for network and AV installations!- Low profile socket assembly only 10mm depth required - ideal for shallow pattress boxes- High quality angled terminal block contacts- Accepts 22-26 AWG solid core wire- Dual type terminal blocks (for Krone or 110 IDC professional IDC Professional / IDC low cost punchdown tools)- Dual standard labelling (T568A/T568B colour coding standards)- Faceplate features shuttered sockets to protect against dust- Easy attach ID labels with protective cover- Screws supplied

The Lindy Modular AV Faceplate System allows you to create your own custom face plates by using a combination of Snap-in Blocks and Keystone modules. Fit this HDMI Keystone into a Keystone Snap-in Block and place into a face plate along side other Keystone and Snap-in modules.These modules provide a full range of solutions for AV, networking, voice and audio installations. The wide selection of modules and face plates can be custom configured giving you greater control and flexibility. Additional required products... Please Note: The Lindy Modular AV Faceplate System must be used in conjunction with Lindy Keystone Snap-in Blocks and Faceplates. Place this Keystone into either a Single Keystone Snap-in Blocks or Dual Keystone Snap-in Blocks which come in packs of four. Then use with a Single Gang Faceplate or Double Gang Faceplate.

The Lindy Modular AV Face Plate System allows you to create your own custom face plates by using a combination of Snap-in Blocks and Keystone modules. Fit this F type Keystone into a Keystone Snap-in Block and place into a face plate along side other Keystone and Snap-in modules.These modules provide a full range of solutions for AV, networking, voice and audio installations. The wide selection of modules and face plates can be custom configured giving you greater control and flexibility. Additional required products... Please Note:The Lindy Modular AV Face Plate System must be used in conjunction with Lindy Keystone Snap-in Blocks and Face Plates. Place this Keystone into either aSingle Keystone Snap-in BlocksorDual Keystone Snap-in Blockswhich come in packs of four. Then use with aSingle Gang Face PlateorDouble Gang Face Plate.

Cat.6 face plate for network and AV installations! - Low profile socket assembly only 20mm depth required - ideal for shallow pattress boxes - High quality angled terminal block contacts - Accepts 22-26 AWG solid core wire - Dual type terminal blocks (for Krone or 110 IDC professional IDC Professional / IDC low cost punchdown tools) - Dual standard labelling (T568A/T568B colour coding standards) - Faceplate features angled, shuttered sockets to protect against dust - Easy attach ID labels with protective cover - Screws supplied

Cat.5e face plate for network and AV installations! - Low profile socket assembly only 20mm depth required - ideal for shallow pattress boxes - High quality angled terminal block contacts - Accepts 22-26 AWG solid core wire - Dual type terminal blocks (for Krone or 110 IDC professional IDC Professional / IDC low cost punchdown tools) - Dual standard labelling (T568A/T568B colour coding standards) - Faceplate features angled, shuttered sockets to protect against dust - Easy attach ID labels with protective cover - Screws supplied