This Switched Automatic Transfer Switch / ATS PDU provides a redundant power option for single-corded network devices. Dual input cords support separate connection to primary and secondary power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Switched PDU features include individually controllable output receptacles and built-in network interface. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. SmartOnline® series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability. The Java-free LX Platform HTML5-based network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separate) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.

Charges Up to 16 Tablets, Smartphones and Other USB DevicesRecommended for schools, offices and other environments where multiple USB devices are usedCompatible devices include iPad, iPod, iPhone and Android tablets and smartphonesProvides up to 5V, 2.4A (12W) of charging power to each portLED indicators signal ports in useBackward compatible with previous USB generationsSupports data transfer rates up to 480 MbpsAlso Syncs Devices via Connected ComputerSyncs USB devices using its compatible software, such as iTunes or Apple ConfiguratorIncluded USB cable connects USB-B port and computer's USB-A portMini-USB Firmware PortEnables future software upgrades to support newer devicesEasy Installation and ConnectionMounts in 2U of EIA-standard 19 in. rack using included hardwareAlso installs on level surface using included rubber feetConveniently configures for professional, educational or personal installation10-ft. (3.05 m) BS 1363 to C13 and CEE 7/7 to C13 power cords includedDurable steel housingTAA-CompliantComplies with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases