Showing 0–7 of 7 results

The Vertiv Avocent MergePoint IQ Server Interface Module is designed for use with KVM over IP switches. This cable connects to the Autoview and MergePoint Unity KVM Switches using standard CAT5 cable and provides a VGA video and USB 2.0 interface for connecting to the server. The cable allows the administrator to use virtual media for remote ISO loads and troubleshooting as well as having smartcard/CAC authentication support. One cable is required for each server connected to the KVM Switch.

The Vertiv Avocent MergePoint IQ Server Interface Module is designed for use with KVM over IP switches. This cable connects to the Autoview and MergePoint Unity KVM Switches using standard CAT5 cable and provides a DisplayPort video and USB 2.0 interface for connecting to the server. The cable allows the administrator to use virtual media for remote ISO loads and troubleshooting as well as having smartcard/CAC authentication support. One cable is required for each server connected to the KVM Switch.

Low-voltage devices, like the Avocent® HMX and Avocent LV Extender, often require the use of external power supplies for operation. Avocent power supplies provide great reliability and efficiency, but when IT infrastructures require flexibility coupled with the highest levels of efficiency, the Avocent® RMPSU delivers. The Avocent RMPSU increases reliability while providing economies of scale and convenience that aren’t possible with external power supplies. Consolidate for More Efficient Power Distribution Power integrity, safety and management are core elements of the RMPSU system. At start up, the RMPSU checks the status of the power module(s). It then enables each of the power outputs in sequence to reduce the instantaneous load on the power modules. After start up each power output is protected by overlapping safety features that guard against excess demand by any connected device. Additionally, the RMPSU can be controlled and monitored via a web interface. Temperature, fan speeds and individual current measurements are viewable and each output can be individually controlled. The RMPSU features either one, or two, hot-swappable switched mode 460W power modules. A single power module is rated at 500,000 hours MTBF and can easily meet the needs of sixteen ports. However, in situations where redundancy is required, a second power module is available. With two power modules, the normal load will be intelligently balanced; with the full power load transferring immediately to the healthy module should one of the modules cease operation. Ready for Change Whether, the requirement is adding new capability or optimizing current space in the rack, the RMPSU makes it easy to add or relocate systems without the need to manage external power supplies. Each RMPSU can support up to 8 or 16 devices. All power outputs feature a locking connector to guard against accidental disconnection and provides a maximum of 20W at 12V. The Avocent Rackmount Power Supply (RMPSU) is a perfect solution for organizations that need to reduce power usage, increase flexibility and optimize precious rack real estate.

The Vertiv Avocent MergePoint IQ Server Interface Module is designed for use with KVM over IP switches. This cable connects to the MergePoint Unity KVM Switches using standard CAT5 cable and provides a Serial interface for connecting to the server. One cable is required for each server connected to the KVM Switch.

The Vertiv Avocent MergePoint IQ Server Interface Module is designed for use with KVM over IP switches. This cable connects to the Autoview and MergePoint Unity KVM Switches using standard CAT5 cable and provides a DVI video and USB 2.0 interface for connecting to the server. The cable allows the administrator to use virtual media for remote ISO loads and troubleshooting as well as having smartcard/CAC authentication support. One cable is required for each server connected to the KVM Switch.

The Vertiv Avocent Small Form Factor IQ Server Interface Module is designed for use with KVM over IP switches, providing Easier and Cleaner cable management with the rack connecting to the server. This Server Interface Module connects to the Autoview and MergePoint Unity KVM Switches using standard CAT5 cable and provides a VGA video and USB 2.0 interface for connecting to the server. The cable allows the administrator to use virtual media for remote ISO loads and troubleshooting as well as having smartcard/CAC authentication support. One cable is required for each server connected to the KVM Switch.

The Vertiv Avocent MergePoint IQ Server Interface Module is designed for use with KVM over IP switches. This cable connects to the Autoview and MergePoint Unity KVM Switches using standard CAT5 cable and provides a HDMI video and USB 2.0 interface for connecting to the server. The cable allows the administrator to use virtual media for remote ISO loads and troubleshooting as well as having smartcard/CAC authentication support. One cable is required for each server connected to the KVM Switch.