Showing 0–10 of 17 results

APC NetShelter Rack Automatic Transfer Switch (ATS) AP4421A is the Fifth-Generation range of high availability switches offering greater control of your IT equipment from Cloud to Edge. With Industry leading reliability, agility, and manageability the APC NetShelter Rack ATS provides redundant power to single-corded equipment loads in the IT rack. AP4421A is single phase 1U Rack ATS with 10A rated current, 230V rated voltage and 2000VA load capacity. It comes with 2 IEC C14 inlet and 12 IEC C13 outlet sockets. This has been upgraded with APC NMC3 and various technical advancements for network port sharing, environmental monitoring and enhanced security. It has 2-years of standard warranty and 5-years of extended warranty for peace of mind and use for years to come. Users can access and configure Rack ATS through secure Web UI, SNMP, CLI and are fully compatible with EcoStruxure IT.

Increase availabilityAn APC Rack Automatic Transfer Switch makes it possible to connect single-powered hardware to two different power sources, in order to increase the availability of this connected hardware and prevent costly downtime. Because an APC Rack ATS uses two input power cords (not included), it can be connected to two different power sources at the same time. By then connecting single-powered hardware to the Rack ATS, this hardware can have access to 2 separate power sources. If one source fails, the Rack ATS immediately switches to the second feed, without the connected hardware being affected.Easy to useYou can read the status of the APC Rack ATS at a glance via the front panel interface, but you can also manage it remotely thanks to its built-in network management functionality.ConvenienceBecause this Rack ATS is equipped with multiple outputs, multiple single-powered devices can be connected to the ATS at the same time, so that all benefit from the security of two feeds.SafetyThe built-in intelligent interface allows this APC rack ATS to monitor both input power sources, detect deviations in voltage or frequency and then take a user-defined action, such as sending an alarm or switching.AccessoriesConnect the APC ATS using 2x the AP9875, (C19-Schuko), AP9876 (C19-IEC309 16A) or AP9877 (C19-C20) and provide the ATS with a temperature and humidity sensor (AP9335TH). You can prevent loose power cords with a retention bracket the AP7769.Warranty extensionThe factory warranty of this APC Rackmount Automatic Transfer Switch is 2 years and can be extended to 3 years using WBEXTWAR1YR-AC-03.FeaturesAPC Rack Automatic Transfer Switch AP4423AInput: 230V, input connection type: C20 (2x)Output 230V, output connection type: C13 (8x) + C19 (1x)Max power: 3680WattIncludes: Rack mounting brackets, Serial Communication cable - RJ12 to female DB-9APC NetShelter Rack Automatic Transfer Switch (ATS) AP4423A is the Fifth-Generation range of high availability switches offering greater control of your IT equipment from Cloud to Edge. With Industry leading reliability, agility, and manageability the APC NetShelter Rack ATS provides redundant power to single-corded equipment loads in the IT rack. AP4423A is single phase 1U Rack ATS with 16A rated current, 230V rated voltage and 3700VA load capacity. It comes with 2 IEC C20 inlet and 8 IEC C13, 1 IEC C19 outlet sockets. This has been upgraded with APC NMC3 and various technical advancements for network port sharing, environmental monitoring and enhanced security. It has 2-years of standard warranty and 5-years of extended warranty for peace of mind and use for years to come. Users can access and configure Rack ATS through secure Web UI, SNMP, CLI and are fully compatible with EcoStruxure IT.

Non-Stop Power,Year-Round Protection.Solar Panel Tapo A200Up to 4.5W Charging Power, Non-Stop Power SupplyMade of premium monocrystalline silicon cells, Tapo A200 provides high-power(up to 4.5W*), which means only 30min† of standard sunlight every day can keep your Tapo battery cameras working around the clock.Works with Tapo Battery CamerasCompatible with Tapo C425, Tapo C420, and Tapo C400, enabling your Tapo battery camera to protect you all year round.More products will be supported in the future.360° Angle Adjustable for Sufficient SunlightMount your solar panel on the wall or roof and adjust its angle flexibly to capture enough sunlight with an angle-adjustable bracket.4m Charging Cable for Flexible InstallationNo need to worry about the distance limit of your solar panel and camera. Just find the best position, place it there, and enjoy free solar energy.IP65 WeatherproofOffers reliable performance and keeps your battery cameras stay charged even in harsh environments with rain and dust.

Make the Seamless Switch to Smart Living.Tapo Smart SwitchControl Anyway You WantMake your traditional lighting smart with the Tapo Smart Switch. Turn your lights on and off with your voice, or control them from your phone. Thanks to the switch's battery-powered design with 1+ year battery life, enjoy the smart lifestyle without rewiring your home or replacing your current bulbs.Works for Most House and AppartmentTapo smart switch does not require the Neutral wire. No need to rewire, just like traditional dumb switches. Normal smart switch requires the Neutral wire to work. 90% of families need an eletrician to rewire before they can install the switch.Worry-Free MaintenanceTapo smart switch uses two AAA/LR03 batteries. The tool-less battery replacement design allows you to do it by yourself.

Manage Multi-bulb Lighting In A Simple And Cost-Effcient WayTapo Smart Swtiches make the perfect choice when your dining room and living room are decorated with multi-bulb chandeliers or pendant clusters. Smarten your whole room lighting with a single tap.Smart Control For All Family MembersOne can manage and control the room lighting either via the Tapo app or symply turn on/off the smart switch manually, which is convenient for each family member, especially the elderly and children.Flexible Installation With No RewiringThe Tapo Smart Switch can work without neutral wire, meaning that it does not require any rewiring or redecoration and is ideal for most homes. Simply replace the traditional switch with our Tapo Switch and your smart home lighting is ready.Highest Compatibility With No FlickeringOur product supports all common types of light bulb. And support light bulbs under 1000 W with no minimum wattage requirement.

This Schneider OffGrid Solar Panel Accessory provides reliable and versatile recharging of your portable power station, both at home or in off-grid situations. This 100W solar panel is compatible with all Schneider OffGrid Portable Power Station via DC connector. It comes with a 2 year warranty for your peace of mind.

This Schneider OffGrid Solar Panel Accessory provides reliable and versatile recharging of your portable power station, both at home or in off-grid situations. This 200W solar panel is compatible with Schneider OffGrid Portable Power Station 500 and 730 via DC connector. It comes with a 2 year warranty for your peace of mind.

APC NetShelter Rack Automatic Transfer Switch (ATS) AP4424A is the Fifth-Generation range of high availability switches offering greater control of your IT equipment from Cloud to Edge. With Industry leading reliability, agility, and manageability the APC NetShelter Rack ATS provides redundant power to single-corded equipment loads in the IT rack. AP4424A is single phase 2U Rack ATS with 32A rated current, 230V rated voltage and 7400VA load capacity. It comes with inbuilt circuit breaker protection, 2 IEC 309 inlet and 16 IEC C13, 2 IEC C19 outlet sockets. This has been upgraded with APC NMC3 and various technical advancements for network port sharing, environmental monitoring and enhanced security. It has 2-years of standard warranty and 5-years of extended warranty for peace of mind and use for years to come. Users can access and configure Rack ATS through secure Web UI, SNMP, CLI and are fully compatible with EcoStruxure IT.