AddOn's Laser-Optomized Muliti-Mode fiber (LOMM) Duplex LC/LC Aqua Patch Cable is a laser-optimized multimode fiber (LOMMF) cable which offers backward compatibility with existing 50/125 equipment as well as providing the performance overhead needed to support both 10 gigabit applications and laser light sources. This fiber-optic cable provides the fire protection needed to run within walls and air plenums eliminating the need for conduit. The low-smoke Zero-Halogen jacket protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial. In addition, it provides 10 gigabit transfers.This patch cable is recommended for connections between fibre patch panels, hubs, switches, media converters and routers, etc. Furthermore, this caple provides higher speeds and increased bandwidth, compared to conventional twisted-pair copper cable.

This SFP+ module is a Cisco compatible SFP+ transceiver that operates over Passive Twinax, with a maximum reach of 5m, built to meet or exceed the OEM's specifications, and comply with MSA (Multi-Source Agreement) standards. All products are 100% functionally tested, and are guaranteed compatible.Our Transceivers (GBIC, SFP, SFP+, X2, XFP and XENPAK) are 100% compliant with their designed networking application, and are factory programed with OEM specific configuration data required for seamless networking compliance. These transceivers initialize and perform identically to the OEM transceivers and can be mixed and deployed with other OEM or 3rd party transceivers, for outstanding network performance.We offer a complete line of OEM compatible network transceiver modules. Now you have a cost effective solution to your network upgrade needs. All our products are functionally tested in their intended application; we guarantee our product will work right the first time.

This SFP+ module is a Cisco compatible SFP+ transceiver that operates over Passive Twinax, with a maximum reach of 5m, built to meet or exceed the OEM's specifications, and comply with MSA (Multi-Source Agreement) standards. All products are 100% functionally tested, and are guaranteed compatible.Our Transceivers (GBIC, SFP, SFP+, X2, XFP and XENPAK) are 100% compliant with their designed networking application, and are factory programed with OEM specific configuration data required for seamless networking compliance. These transceivers initialize and perform identically to the OEM transceivers and can be mixed and deployed with other OEM or 3rd party transceivers, for outstanding network performance.We offer a complete line of OEM compatible network transceiver modules. Now you have a cost effective solution to your network upgrade needs. All our products are functionally tested in their intended application; we guarantee our product will work right the first time.

This SFP+ module is a Intel compatible SFP+ transceiver that operates over Passive Twinax, with a maximum reach of 5m, built to meet or exceed the OEM's specifications, and comply with MSA (Multi-Source Agreement) standards. All products are 100% functionally tested, and are guaranteed compatible.Our Transceivers (GBIC, SFP, SFP+, X2, XFP and XENPAK) are 100% compliant with their designed networking application, and are factory programed with OEM specific configuration data required for seamless networking compliance. These transceivers initialize and perform identically to the OEM transceivers and can be mixed and deployed with other OEM or 3rd party transceivers, for outstanding network performance.We offer a complete line of OEM compatible network transceiver modules. Now you have a cost effective solution to your network upgrade needs. All our products are functionally tested in their intended application; we guarantee our product will work right the first time.

This Cisco® SFP-H10GB-CU1M to multiple OEM compatible 10GBase-CU SFP+ to SFP+ passive TAA (Trade Acts Agreement) compliant direct attach cable has a maximum reach of 1.0m (3.3ft). It is 100% Cisco® compatible and has been programmed to allow for connection to multiple OEMs. These OEMs include Avago, D-Link, Edge-corE, F5 Networks, Finisar, Fortinet, Linksys, Mellanox, NetAPP, Zyxel and more. This cable is also uniquely serialized and data-traffic and application tested to ensure that it is compliant and functional. This direct attach cable will initialize and perform identically to Cisco® and the multiple OEM's individual cables and is built to meet or exceed Cisco®'s specifications, and comply with MSA (Multi-Source Agreement) standards. We stand behind the quality of our products and proudly offer a limited lifetime warranty.

Cisco® SFP-H10GB-CU3M to Intel® XDACBL3M Compatible 10GBase-CU SFP+ to SFP+ Direct Attach Cable (Passive Twinax, 3m) A 100% Cisco® SFP-H10GB-CU3M to Intel® XDACBL3M compatible 10GBase-CU SFP+ to SFP+ twinax direct attached cable that operates over passive copper, with a maximum reach of 3.00m (9.84ft). This Cisco® to Intel® compatible twinax cable has been programmed, uniquely serialized, and data-traffic and application tested to ensure it is 100% compliant and functional. Our direct attached cable will initialize and perform identically to Cisco and Intel's cable and is built to meet or exceed Cisco and Intel's specifications, and comply with MSA (Multi-Source Agreement) standards. The actual part shipped may have a different part number, but will be functionally identical and 100% compatible. Trade Agreements Act (TAA) versions of this part are available.

Add-On's Ten Gigabit Small Form Factor Pluggable (SFP+) transceivers are designed to exceed OEM system requirements. All products are guaranteed 100% compatible and will not void OEM Service/support programs. Our SFP Transceivers utilize industry standard bi-directional serial optical data communication protocols such as Gigabit Ethernet or Fiber Channel reaching speeds up to 8Gbps.Add-On's Transceivers are compliant with the Multi-Source Agreement (MSA) ensuring compatibility with a wide range of networking equipment. Select your choice or Copper or Fiber versions that support Fast Ethernet and Gigabit Ethernet speeds- 100% OEM Compatible- Conforms to IEEE 802.3z standard- Class 1 Laser Product Compliant with the Requirements of IEC 60825-1and IEC 60825-2- Compliant with Multi-Source Agreement (MSA)- RoHS Compliant

This Cisco® SFP-H10GB-CU3M to multiple OEM compatible 10GBase-CU SFP+ to SFP+ passive TAA (Trade Acts Agreement) compliant direct attach cable has a maximum reach of 3.0m (9.8ft). It is 100% Cisco® compatible and has been programmed to allow for connection to multiple OEMs. These OEMs include Avago, D-Link, Edge-corE, F5 Networks, Finisar, Fortinet, Linksys, Mellanox, NetAPP, Zyxel and more. This cable is also uniquely serialized and data-traffic and application tested to ensure that it is compliant and functional. This direct attach cable will initialize and perform identically to Cisco® and the multiple OEM's individual cables and is built to meet or exceed Cisco®'s specifications, and comply with MSA (Multi-Source Agreement) standards. We stand behind the quality of our products and proudly offer a limited lifetime warranty.

This is a 3m single-mode fiber (SMF) MPO/4xLC duplex fanout yellow patch cable. This cable utilizes a female (no pins) MPO connector on one end, and 8 LC (4 LC duplex) male plugs on the other end. This SMF 9/125 cable provides high-density connection for network equipment. Our MPO to 4xLC duplex cable provides savings in circuit card and rack space. In addition, it accomodates speeds up to 40 gigabits, commonly used in QSFP applications. This patch cable is recommended for connections between fiber patch panels, hubs, switches, media converters and routers, etc. Our patch cables are 100% compliant for all of your networking needs. They provide higher speeds and increased bandwidth, compared to conventional twisted-pair copper cable. Each cable is 100% optically tested for insertion loss before you take ownership. Now you have a cost effective solution to your network upgrade needs.

This Juniper Networks® EX-SFP-10GE-DAC-3M to Intel® XDACBL3M dual OEM compatible 10GBase-CU SFP+ to SFP+ passive direct attach cable has a maximum reach of 3.00m (9.84ft). It is 100% Juniper Networks® to Intel® compatible and has been programmed, uniquely serialized, and data-traffic and application tested to ensure that it is compliant and functional. This direct attach cable will initialize and perform identically to Juniper Networks® and Intel®'s individual cables and is built to meet or exceed Juniper Networks® and Intel®'s specifications, and comply with MSA (Multi-Source Agreement) standards. All of our dual OEM cables are Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty.