Showing 820–830 of 1234 results

Reliably connect high-bandwidth HDMI 2.1 devices through plenum spacesRoute this Ultra High Speed HDMI 2.1 Hybrid Active Optical Cable (AOC) through office plenum spaces for long distance transmission of 8K 60Hz video and high quality audio.Hybrid AOC ConstructionThe HDMI 2.1 AOC incorporates a hybrid construction consisting of fiber optic cores and copper conductors. This enables the offloading of low-bandwidth signals (EDID/HDCP/eARC) to maintain high-bandwidth transmission of 8K 60Hz video over fiber. The fiber optic inner cores and shielded copper conductors greatly reduce EMI for optimal signal quality across longer distances.Full-Featured HDMI 2.1The 8K HDMI Fiber Optic Cable supports full HDMI 2.1 specifications:• High Bit Rate 3 (HBR3) supports up to 48Gbps bandwidth for higher refresh rates• High Dynamic Range (HDR10+) with 12-bit processing for higher contrast ratio and vibrant, cinematic picture quality• Enhanced Audio Return Channel (eARC) for uncompressed 7.1 and 32-channel audio• Display Stream Compression 1.2a (DSC) for maximum resolution output• Forward Error Correction to manage data transmission errors• High-Bandwidth Digital Content Protection (HDCP 2.3) for a secure connection between source and displayFlexible Plenum-Rated CablingThis Plenum-Rated HDMI 2.1 Cable features a CMP-rated cable jacket with low-smoke and flame characteristics. It is ideal for use in plenum spaces in buildings (e.g., ceilings and in-wall installations). The optical fiber core is reinforced with Aramid strands for tensile strength, and is rated to withstand over 6,000 bending cycles at 120 degrees. This protects the cable from damage when routing through tight spaces requiring multiple bends.The 4.6mm (0.18in) cable outer diameter is flexible and slimmer than typical passive HDMI cables, making it suitable for installation in space-constrained environments.Please Note : This cable is unidirectional and must be installed in a specific direction. Please refer to the SOURCE and DISPLAY labels on the HDMI connectors to ensure that each end corresponds with the correct hardware.The StarTech.com Advantage

Add two RS232 serial ports with COM retention to your laptop or desktop computer through USBThe ICUSB2322F 2-Port USB to Serial RS232 Adapter Cable with FTDI chipset and COM Retention converts an available USB 1.1 or 2.0 port into 2 RS232 serial DB9 ports to connect, monitor and control your serial devices. This compact adapter features COM retention, allowing the same COM port values to automatically be re-assigned to the port if the cable is disconnected and re-connected to the host computer, or if the system is rebooted. Unlike most USB-serial adapters, this one uses the FTDI chipset, which supports additional customization, advanced features, and compatibility not necessarily offered by other solutions. This USB-serial adapter is compatible with a broad list of Operating Systems, including Windows®, Windows CE, Mac OS and Linux, making this product the perfect solution for integrating into mixed environments. Backed by a StarTech.com 2-year warranty and free lifetime technical support.The StarTech.com Advantage

Charge and Sync your Apple Lightning-equipped devices over longer distancesThe USBLT3MB 10ft/3m Black Lightning to USB Cable for iPhone, iPod and iPad is colored to suit your black mobile devices and enables long-range syncing and charging of your Lightning-enabled mobile digital devices – making it ideal for people on the move who need to access their device while it’s charging. The cable features heavy gauge (20 AWG) wire for overcoming distance restrictions and allowing for full charging power at a distance of up to 3m, with no loss of charge time. The reversible 8-pin Lightning connector can be plugged into your iOS-enabled device with either side facing up, meaning there is no wrong way of inserting the cable into the device.This durable cable is Apple MFi certified and backed by StarTech.com's 2-year Warranty to ensure dependable performance.The StarTech.com Advantage- Maintain optimal charge time over longer distances, with a heavier gauge of wire- Complements your black Apple mobile devices- Guaranteed reliability

Connect DVI capable devices to HDMI-enabled devices and vice versaThe HDMIDVIMF HDMI to DVI Cable Adapter features one HDMI male connector and one DVI-D female connector, which enables a bi-directional connection between HDMI-capable devices and DVI-D capable devices to overcome compatibility issues.Designed and constructed to provide a dependable HDMI to DVI connection, this high quality adapter is backed by StarTech.com's Lifetime Warranty.The StarTech.com Advantage- Eliminates the need for multiple cables and reduces clutter- Guaranteed reliability

Convert a VGA male connector into a VGA female connectorThe GC15HSF Slimline Gender Changer (HDDB15F to HDDB15F) converts a High Density DB15 male connector to a High Density DB15 female connector.The Slimline Gender Changer is backed by Lifetime Warranty, guaranteeing long-lasting performance.The StarTech.com Advantage- Couple two VGA cables together to get a longer cable- Guaranteed reliability

Add space for your DB9 serial port and connect a DB9 cable even in tight installation spacesThis Right Angle DB9 to DB9 Serial Cable Adapter features one Right Angled DB9 Male serial connector and one standard DB9 female serial connector - a convenient solution for connecting serial devices where connection space around the DB9 port is limited.Please note: There are two variations of this product, positioned differently to allow for easier connections based on the direction of right angle needed. Please see StarTech.com's GC99MFRA1 for more information.The StarTech.com Advantage

This Right Angle VGA to VGA Cable Adapter Type 1 provides one right angled VGA male connector and one standard VGA female connector - allowing you to connect the cable to a VGA female port, even if space around the VGA port is limited.The StarTech.com Advantage- Add space for your VGA female port with this male to female right angled VGA adapter, it allows you to connect a VGA cable in tight installation sapces- Easy to use and install- Backed by StarTech.com's lifetime warranty

Convert a DB25 male port into a DB9 male connectorThis DB25 to DB9 Serial Adapter converts a 25-pin serial port to a 9 pin male connector. Backed by Lifetime Warranty, the DB25 to DB9M Serial Adapter is designed for durable, reliable performance and connectivity.The StarTech.com Advantage- Guaranteed reliability

LSZH Jacket | Aramid Fiber Sheath | Ideal for SANs, data servers, SFP+The A50FBLCSC2 2-meter (6.6ft), 10 Gigabit, Aqua Multimode 50/125 Duplex LSZH Fiber Patch Cable is terminated with one LC (male) connector and one SC (male) connector and is composed of 50/125 micron OM3 aqua fiber to deliver reliable data transfers at blinding speeds making it perfect for fiber cable runs between multiple backbone switches, hubs and routers as well as higher end networking equipment.Suited for a broad range of environments, A50FBLCSC2 is housed in a flame retardant, LSZH (Low-Smoke, Zero-Halogen) cable jacket, taking safety to a new level by ensuring minimal smoke, toxicity and corrosion in the event of a fire – making it the best choice for a wide range of environments, including industrial settings, central offices and schools, as well as residential settings where building codes are a consideration.The StarTech.com Advantage

Enhance the performance capabilities of SWDM applications over an OM5 fiber networkOM5 LC to LC Multimode Duplex Fiber Optic Patch cable facilitates connectivity across 40G and 100G networks. It supports SWDM (Shortwave Wavelength Division Multiplexing) across an extended wavelength range of 850-953nm VCSEL, enhancing signal quality and performance capacity over OM4.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure correct fiber alignment to prevent connectivity issues and minimize insertion loss. Designed for reliability in high-density network applications, the LC to LC UPC polished fiber ends greatly improves return loss characteristics over older PC polishing techniques. The Laser-Optimized Multi-Mode Fiber (LOMMF) OM5 fiber patch cable is ideal for 850-953 nm Vertical-Cavity Surface-Emitting Laser (VCSEL) and 1300 nm LED sources.CompatibilityThis multimode 50/125µm fiber optic patch cord is backward compatible with OM4 and OM3 10G networks, ensuring a reliable connection in legacy fiber environments.LSZH Cable JacketHoused in a LSZH (Low-Smoke, Zero-Halogen) flame-retardant jacket, the OM5 fiber cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OM5 fiber cable is also individually tested for insertion loss performance that meets or exceeds the TIA/EIA-568 industry standard, for guaranteed compatibility and 100% reliability.The StarTech.com Advantage