Add a high capacity, adjustable depth fixed shelf into almost any 4-Post server rack or cabinetThe ADJSHELFHD 1U 4-post Adjustable Heavy Duty Fixed Rack Mount Shelf lets you add a high-capacity, adjustable 1U shelf to virtually any standard 4-post 19-inch server rack or cabinet.This heavy duty rackmount shelf can be adjusted from 19.5in to 38in (mounting depth) to fit your rack. Constructed using 1.0mm SPCC commercial grade cold-rolled steel, providing the ability to hold up to 150kg (330lbs) of equipment - a durable solution for storing large, non-rackmount pieces of equipment, heavy tools or peripherals in your rack or cabinet.The ADJSHELFHD is backed for life, including free lifetime 24/5 multi-lingual technical assistance.The StarTech.com Advantage

Turn a USB Type-C port on your laptop into three USB Type-A ports (5Gbps) and one Gigabit Ethernet portIf you have a USB-C™ equipped laptop, but lack other important connection ports, then this hub can help. It couples your USB peripheral and RJ45 network connections into a single, convenient combination hub. known as USB 3.2 Gen 1.Through the USB-C host connector, this hub gives you three traditional USB-A ports, and a Gigabit Ethernet connection, making it a must-have laptop accessory. Plus, the integrated 30 cm (12 in.) cable lets you place the hub, your devices, and your network connection, exactly where you need them.It's ideal for virtually any USB-C equipped laptop, such as Dell™ XPS, MacBook Pro, Chromebook Pixel™, or other MacOS or Windows based laptop or tablet.Take advantage of USB-CThis dynamic USB 3.2 Gen 1 hub is TAA compliant and integrates an easy-to-use USB Type-C™ connector. It’s small and reversible, which makes for easier insertions, and you can connect the plug with either side facing up, which means less risk of damaging your ports and less frustration.While your USB-C equipped laptop, or MacBook is lightweight and portable, it might be missing vital connectivity ports, such as wired Internet. Because this hub offers a Gigabit Ethernet port, you can connect to a network in locations were Wi-Fi® is unreliable or unavailable.Compact design for portability or permanent placementWith a small footprint and lightweight housing, you can easily tuck the hub and the included power adapter into your laptop bag to expand your connectivity when you’re traveling.Plus, the compact USB 3.2 Gen 1 hub takes up minimal space on a desk, so it fits perfectly in office, hot-desk (short-term guest), and BYOD workstation environments.Extended-length cable eliminates aggravationThe hub’s built-in USB cable is long enough to reach your laptop or tablet’s USB 3.2 Gen 1 port, regardless of where the port is located. Now, you can eliminate the worry and frustration when your hub’s built-in cable is too short and doesn’t reach your laptop’s USB port location.Plus, the extended-length cable provides you with more desk placement options, which makes it easier to create a comfortable, space-efficient work area.Save money and timeThis easy-to-use hub is natively supported in most operating systems, and you can install it quickly, without having to install additional drivers or software. You can also avoid the nuisance and cost of purchasing new devices, by using the USB 3.2 Gen 1 hub with your current USB 2.0 and 1.x devices.The HB30C3A1GE is backed by a StarTech.com 2-year warranty and free lifetime technical support.The StarTech.com Advantage

Connect to a GbE network through your laptop’s USB-C port using the Gigabit SFP of your choiceThis USB-C™ to fiber-optic converter lets you utilize the USB 3.0 (Type-C™) port on your laptop or tablet to provide a secure fiber network connection. Windows® and Mac compatible, the network adapter provides a Gigabit Ethernet (1000 Mbps) optical network connection for portable laptops or tablets, or systems without expansion slots.A flexible solution with an open SFP slotThe open SFP slot enables you to use your preferred SFP transceiver module to meet your networking needs - use an SFP with your desired wavelength, distance, connection type to achieve an efficient network solution. (SFP sold separately.)Secure fiber-to-the-desk connectivityThis USB to fiber-optic converter provides reliable fiber connectivity while protecting your network from problems with electronic interference - a common issue with copper Ethernet networks. Fiber-to-the-desk connectivity (FTTD) maximizes network security, reducing the risk of data leaks for sensitive information, without compromising network speed and reliability.Easy portabilityCompact and portable, this USB-C to fiber-optic converter is powered directly from the USB port.Plug and playGet up and running quickly. The USB to fiber-optic converter supports certified drivers for Windows, Mac and Linux®. Once the adapter is plugged into a USB-C port, you simply install the drivers and the adapter is ready to transmit over a fiber network.Enhance Productivity and Device Management with the StarTech.com Connectivity Tools ApplicationDeveloped to improve performance and security, StarTech.com Connectivity Tools is the only software suite on the market that works with a wide range of IT connectivity accessories. The software suite includes:•Mac Address Pass-Through Utility : To improve network security.•Wi-Fi Auto Switch Utility : Enabling users to quickly access faster network speeds via wired LAN.For more information and to download the StarTech.com Connectivity Tools application, please visit: www.StarTech.com/Connectivity-ToolsThe US1GC30SFP is backed by a StarTech.com 2-year warranty and free lifetime technical support.The StarTech.com Advantage

Hardware Included | TAA Compliant | Lifetime WarrantyThis 3U 19 in server room rack enables vertical mounting of rack-mounted equipment of any depth. Mount the bracket to a wood stud wall and position equipment vertically, maximizing space utilization and optimizing layout design. The open-frame design allows for unrestricted airflow to the mounted equipment, improving cooling.Versatile DesignMount the bracket into a wall featuring wood stud construction, where studs are spaced 16in (40.6cm) apart. The patch panel wall mount rack is perfect for SoHo (small office, home office) and other small footprint applications allowing you to vertically mount up to 150lb (68kg) of standard rack equipment into this 14-gauge steel bracket. The mounting holes are positioned 16in (40.6cm) apart, matching the standard for construction framework.Included HardwareThe vertical wall mount network rack conveniently includes 6x wood screws, 12x M5 square cage nuts, and 12x M5 screws to attach the rack to a wall and mount your equipment.The wall mount vertical rack is backed for life, including free lifetime 24/5 multi-lingual technical assistance.The StarTech.com Advantage

Get the scalability you need by adding 7 USB 3.0 ports with SATA powerto your computerHandle your workload more efficiently. This USB 3.0 card expands your computer’s capabilities by giving you seven extra USB 3.0 ports. It’s engineered with an innovative stacked port layout to fit easily into both low-profile and standard desktop computers.Greater port count. Greater scalability.More ports means you can add USB devices as you need them. This robust USB 3.0 card gives you seven USB 3.0 ports - six external and one internal - so you can plug in your tablets, smartphones, external hard drives, CD/DVD drives, printer and other devices at the same time. With so many extra ports, you can leave your devices plugged in, so they’re ready to use when you need them. It’s also economical - by being able to connect so many devices, you save the cost of extra hubs or cards.The internal USB 3.0 port lets you connect a USB device inside your computer for added convenience and security.Unique dual-profile designThis versatile USB 3.0 card features a dual-profile design with a stacked port layout. The innovative port configuration allows a high number of external ports in a compact design, allowing it to fit both low-profile and full desktop computer systems. A bracket is included for installation into low-profile computers.Easy driver installationYou'll be up and running in no time. The card automatically installs in Windows 8.1 or later, with native operating system support. It’s also backward compatible with USB 2.0 and 1.x devices to help you get the most out of your existing peripherals.Effective USB 3.0 performance enhanced by UASPThis high-performance SuperSpeed USB 3.0 card supports data transfer rates up to 5 Gbps and is enhanced with UASP support, which can perform ~70% faster read speed and 40% faster write speed over traditional USB 3.0, when paired with a UASP-enabled enclosure.The rugged build quality of the card delivers long-lasting performance, and gives you peace of mind when connecting multiple devices. The PEXUSB3S7 is backed by a StarTech.com 2-year warranty and free lifetime technical support.Note: UASP (USB Attached SCSI Protocol) is supported in Windows 8.1 or later, and Linux kernel 2.6.37 or later. Test results were obtained using an Intel Ivy Bridge system, StarTech.com add-on USB 3.0 cards, a UASP-enabled StarTech.com enclosure, and a SATA III solid state drive.The StarTech.com Advantage- Extend your system capabilities by adding 7 USB 3.0 ports – 6 external and 1 internal – to any PCIe compatible computer- Unique dual-profile design fits standard and low-profile computers- Enjoy fast file transfers with USB 3.0 5Gbps and UASP support

Add a DB9 serial port to the rear panel of a small form factor/low profile computer.The PLATE9MLP 9pin Serial Male to 10pin Motherboard Header LP Slot Plate adds a DB9 serial port to the rear panel of small form factor/low profile computer, connecting to the host computer motherboard using an IDC10 connector.Please refer to this product's Technical Specifications to ensure compatibility with your motherboard.The StarTech.com Advantage- Connects to your motherboard and adds an additional DB9 serial port to the back of your PC- Easy to use and install- Backed by StarTech.com's lifetime warranty

Add four Gigabit Ethernet ports to a client, server or workstation through one PCI Express slotNow you can add four separate Gigabit network ports to your client, server or workstation through just one PCI Express slot, to provide connectivity to multiple networks without draining your budget.Reliable connectivity to multiple networksThis 4-port network card delivers powerful connectivity for your business, corporate or government office environment, with support for high-performance, 4-channel networking and a maximum throughput of up to 1000Mbps in each direction (2000 Mbps total). The network adapter card features the Realtek RTL8111G chipset, which is designed to deliver the performance and enhanced capabilities you need for reliable network connections to your server or computer. A versatile and cost-effective solutionThis versatile quad-port network card is ideal for many business applications requiring upgrades to servers or workstations, adding feature-rich Gigabit networking with four independent ports. Compatible with a broad range of operating systems, this cost-effective PCIe Gigabit NIC is suitable for many SMB and Enterprise applications such as virtualized environments that require multiple NICs (check your VM software for chipset compatibility).The ST1000SPEX43 is backed by a StarTech.com 2-year hardware warranty and free lifetime technical support.The StarTech.com Advantage- Add four independent Gigabit RJ45 ports to connect to multiple networks for high-bandwidth workstations and servers- Realtek RTL8111G chipset for reliable performance- Supports full-duplex flow control

Add four USB 3.2 Gen 1 ports to your computer, plus fast-charge your mobile deviceHere’s a must-have accessory for any mobile device user. This compact USB 3.2 Gen 1 hub lets you connect an additional four USB devices to your computer, plus, you can easily fast-charge your mobile device using the hub’s dedicated charge port (DCP).Fast-charge your iPad, iPhone, and other mobile devicesWith a 2.4 amp dedicated charge port, the hub makes it fast and easy to charge your smartphone, tablet, and other USB-charged devices, including Android™, Apple, and Samsung™ devices.The charge and data ports work simultaneously, so you can conveniently fast-charge your mobile device while continuing to use your other USB 3.2 Gen 1 peripherals. The dedicated charge port stays on even if the host computer is turned off, in sleep mode, or disconnected entirely.Expand the connectivity of your computerBoost your system capabilities by adding four USB 3.2 Gen 1 ports, and enjoy fast data transfer speeds up to 5Gbps. The USB 3.2 Gen 1 (also known as USB 3.1 Gen 1, or USB 3.0) hub works with your high-bandwidth devices such as external hard drives, high-resolution webcams, flash drives, video cameras, and more.Designed for easy useThe 4-port USB 3.2 Gen 1 hub features a small footprint that takes up little space on your desktop. And with ample space between each USB 3.2 Gen 1 port, it’s easy to plug and unplug the devices you use the most.Setup is easy, with no driver installation required, and, for added flexibility the hub is USB-powered or self-powered using the included power adapter.The ST53004U1C is backed by a StarTech.com 2-year warranty and free lifetime technical support.Note: The included power adapter is required to power the dedicated charge port.The StarTech.com Advantage

Rugged SSD Enclosure | Thunderbolt 3 Compatible | USB-C Cable IncludedThis rugged M.2 NVMe PCIe SSD enclosure is a highly portable, high-performance data storage solution for your USB-C or Thunderbolt 3 enabled devices.Unparalleled PerformanceLeverage the high speeds of your M.2 NVMe drive, with this external SSD enclosure. It delivers USB 3.1 Gen 2 read/write speeds up to 10Gbps, nearly twice the capability of traditional M.2 SATA and hard drive enclosures.This fan-less solid aluminum enclosure features an internal thermal pad that transfers heat away from the drive for maximum heat dissipation, ensuring your drive operates noiselessly at an optimal temperature to preserve performance.Dustproof and Water ResistantBe prepared for the unexpected. The enclosure for PCI Express based NVMe SSDs comes with an IP67 rating, which means that it's both dustproof and water resistant.It's the perfect solution for people who work outside. Or, for people who work in environments with a lot of dust, like: construction sites, factories, or manufacturing facilities.Broad CompatibilityThe USB 3.1 Gen 2 NVMe enclosure works with tablets, laptops, desktop computers and hosts that are equipped with USB Type-C and Thunderbolt 3 ports. It's also backward compatible with USB 3.1 Gen 1, making it a convenient solution for the office or other environments.The Choice of IT Pros Since 1985StarTech.com conducts thorough compatibility and performance testing on all our products to ensure we are meeting or exceeding industry standards and providing high-quality products to IT Professionals. Our local StarTech.com Technical Advisors have broad product expertise and work directly with our StarTech.com Engineers to provide support for our customers both pre and post-sales.M2E1BRU31C is backed by a StarTech.com 2-year warranty and free lifetime technical support.The StarTech.com Advantage

Portable Tablet Mount | For 6.6" to 7.8" Wide Tablets | Carrying Bag IncludedThis adjustable tablet tripod stand is perfect for delivering presentations. The stand fits tablets ranging in size from 6.6 to 7.8" in width and up to 0.45" in thickness. Use it with your Apple iPad (including the 10.2" iPad and 11" iPad Pro) or other compatible tablet.This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases.Perfect for PresentationsThe tablet stand lets you use your tablet to deliver powerful presentations, while you stay focused on your audience and the content you're delivering. You can use your tablet as a visual cue or teleprompter, without having to hold it or repeatedly look down at it while you're speaking.Adjustable Height and Viewing AngleUse the tripod while you're sitting or standing. The height is easy to adjust - from 29.3 to 62" (74.5 cm to 157.5 cm). You can also rotate the tablet 360 degrees to change from landscape to portrait position and tilt the screen to your preferred viewing angle. Plus, the tablet holder is detachable, with quick-swap attachments that let you remove the tablet from the stand and place it back in at any time.Portable Tablet Tripod StandThe tripod folds up nicely and comes in a handy carrying bag for portability. Setup is easy - just extend the collapsible tripod stand to the height you need, lock it in place, and mount your tablet.Other Applications• Shoot videos or photos with no camera shake• Give lectures• Portable displays• Tradeshow kioskSTNDTBLT1A5T is backed by a 2-year StarTech.com warranty and free lifetime technical support.The StarTech.com Advantage