Add space for your DB9 serial port and connect a DB9 cable even in tight installation spacesThis Right Angle DB9 to DB9 Serial Cable Adapter features one Right Angled DB9 Male serial connector and one standard DB9 female serial connector - a convenient solution for connecting serial devices where connection space around the DB9 port is limited. Please note: There are two variations of this product, positioned differently to allow for easier connections based on the direction of right angle needed. Please see StarTech.com's GC99MFRA2 for more information.The StarTech.com Advantage

Add space for your VGA port and connect a VGA cable even in tight installation spacesThis Right Angle VGA to VGA Cable Adapter Type 2 provides one right angled VGA male connector and one standard VGA female connector - allowing you to connect the cable to a VGA female port, even if space around the VGA port is limited.The StarTech.com Advantage- Add space for your VGA female port with this male to female right angled VGA adapter, it allows you to connect a VGA cable in tight installation sapces- Easy to use and install- Backed by StarTech.com's lifetime warranty

Extend the reach of your Micro-USB cable by 20-inchesThis male-to-female cable extends the reach of the Micro-USB port on your tablet or phone by 20 inches and is compatible with OTG (USB On-The-Go) adapters.Plus, the cable offers an easy way for you to connect your tablet to an Android docking station which means you can listen to music and charge your tablet using your phone dock.Position your USB 2.0 peripherals the way you wantThe extra length enables you to position your USB 2.0 peripheral devices as needed. Simply connect the extension cable to your phone or tablet and plug your OTG adapter into the cable.With an additional 20 inches, you have extra room for placing your USB OTG capable devices in a way that best suits your needs. You can place your thumb drive out of the way, or position devices such as your keyboard or mouse more comfortably.When connecting a Micro-USB charge-and-sync cable it can provide the extra length you need for connecting to a Micro-USB cable that’s just out of reach.Connect your tablet to an Android dockThis 20 in. extension cable also enables you to connect your Micro USB-enabled tablet to an Android dock. By connecting the female connector to the dock and the male connector to your tablet, you can play music and charge your tablet using a phone docking station that your tablet wouldn’t normally be able to connect to.The USBUBEXT50CM Micro-USB extension cable is backed by StarTech.com's lifetime warranty for guaranteed reliability.The StarTech.com Advantage- Provide extra room for connecting your USB OTG devices to your mobile devices- Guaranteed reliability with our lifetime warranty

KVM Console Cable | VGA & USB | Wired with Single Connector | For LCD Consoles & KVMsThis 10 ft. (3 m) USB KVM Cable enables your StarTech.com Rackmount LCD console and KVM switch kit to conveniently operate your VGA and USB-equipped server.This line of KVM cables are available in variable lengths, and are the only cables engineered for guaranteed compatibility with the StarTech.com line of RKCONS series of Rackmount Consoles and KVM switches. Supported models of Rackmount LCD Consoles are: RKCONS1701, RKCONS17HD, RKCONS1708K, RKCONS1716K, RKCONS1901, RKCONS1908K, RKCONS1916K.Engineered to Keep Your Server Room TidyThis KVM cable has been specifically designed for the StarTech.com line of Rackmount KVM and Console kit. The USB and VGA KVM cord is wired with a unique schematic that enables a single connector on the KVM to interface with both VGA and USB on your server. This space-saving design dramatically reduces cable-clutter in your server rack, and ensures a tidy, professional server room.Crystal-Clear Picture QualityWhen connected to an HD rackmount console, the 10 foot KVM cable supports HD resolutions up to 1920x1200 including 1080p, maintaining the quality of your server’s video card to deliver every detail in high-definition.Available in Different LengthsTo support the complexities and demands of your data center, this 10 foot (3 meter) KVM cable is also available as a 6 foot (1.8 meter KVM Cable (RKCONSUV6), and a 15 foot (4.8 meter) KVM cable (RKCONSUV15).The RKCONSUV10 is backed by a StarTech.com Lifetime warranty and free technical support.The StarTech.com Advantage

CAT6 Ethernet Cable | LSZH | Snagless | 100W PoE | Lifetime WarrantyStarTech.com AdvantageStarTech.com products are designed for IT Professionals to meet their technical standards. Product quality, compatibility and reliability are ensured by our in-house and third-party labs and certifications by leading technology companies.StarTech.com's line of CAT6 cables use 100% copper and gold-plated pins. All of our Category 6 cable products undergo rigorous physical and electrical tests, including the repetitive bend cycle test. Each cable is individually tested (Fluke® patch cord test) to measure worst case NEXT and RL. Beyond our own testing, we work with leading external test labs such as ETL, to obtain product performance and safety certifications.Backed by a risk-free StarTech.com lifetime warranty and 24 hour, five day-a-week, support from qualified Technical Advisors, our brand is trusted throughout the IT ecosystem and used by over 80% of Fortune 500 companies.Product OverviewLow Smoke Zero Halogen (LSZH) Category 6 Snagless Network Patch Cable supports error-free Multi Gigabit connections: 1Gbps, 2.5Gbps, 5Gbps and 10Gbps (up to 160ft/55m). This PVC free high-performance cable offers reliable connectivity to all networking devices, such as Network Interface Cards (NIC), servers, routers, network attached storage (NAS), VoIP phones, PoE devices, etc.This Eco-friendly LSZH CAT6 cable produces lower levels of toxic corrosive fumes and white smoke in the event of a fire, which offers higher visibility, allowing for a safer and faster evacuation.StarTech.com offers the widest selection of lengths and colors, to keep your business network and workstations connected and organized.High Performance CAT6 Ethernet Cable• Reliably Connect Your Ethernet DevicesError-free Multi Gigabit support - 1Gbps, 2.5Gbps, 5Gbps and 10Gbps (up to 55m), 10GBase-T• 650MHz support for increased bandwidth• 100% Copper Cable, Ideal for Powering Your Devices Over EthernetMade with 100% bare copper wire, StarTech.com cables are fully compliant with, unlike other cables that use copper clad aluminum (CCA) wire.Tested up to 100W continuous power throughput.• Complies with IEEE 802.3bt Type 4 standard.• Excellent heat dissipation over prolonged use.Supports high power PoE for Laptops, IP TVs, Security Cameras, VoIP phones, NAS devices, etc.• Quality Construction50-micron gold platted connectors• Snagless boot• 40 mm (1.57") bend radius for strong molded strain relief and improved flexibilityThe Snagless design protects the RJ45 clip and ensures the cables are easily pulled through constrained spaces such as conduits or raceways and prevents the cable from getting caught/damaged during installation.Engineered for Professional Applications• Detailed Spec Drawings AvailableStarTech.com makes it easy for you to integrate the CAT6 cable into your network by providing detailed technical specifications and engineering drawings.• Hassle-free Installation with Reliable Performance and Flexibility6.0 mm (0.23") OD, Flexible PVC-Free jacket with 100 mm (3.93") bend radius• Flexible HD-PE insulation for reduced Intra-pair Crosstalk• Spline separator for reduced Inter-pair Crosstalk and improved heat dissipation for 100W PoE• 24AWG (0.25mm2), 100% copper, stranded wire twisted pairs• U/UTP cable construction• Electrical CharacteristicsETL Verified for maximum performance• Cable Impedance: 100 ohms ± 15% at 250 MHz• Max. DC Resistance: 14 ohms per 1000 ft (305 m)• Pair to GND Capacitance: 330 pF per 328 ft (100 m)• Mutual Capacitance: 5.6 nF per 1000 ft (305 m)• Propagation Delay Skew: 45 ns per 328 ft (100 m)Lab Tested and Third Party Certified for Product Performance and Safety• ETL Verified• 3P Verified to ANSI/TIA-568-2.D Category 6• Fluke® Tested CAT6 Patch CordThe StarTech.com Advantage

Enhance the performance capabilities of CWDM applications over an OS2 fiber networkOS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.CompatibilityThis 9/125µm Single Mode fiber cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data center equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Engineered for Optimal PerformancePrecision-manufactured ceramic ferrules ensure accurate fiber alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to SC fiber ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fiber core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fiber cable by reflecting the light back into the fiber. The OS2 fiber patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.LSZH Cable JacketHoused in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fiber cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.Each OS2 fiber cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.The StarTech.com Advantage

This bi-directional cable can be used with both 3.5mm audio-out and audio-in ports, allowing you to connect your AirPods Max to 3.5mm audio sources, or to connect your iPhone or iPad to speakers with 3.5mm audio ports. When connected to AirPods Max, this cable enables ultra-low latency on a par with the device’s built-in speakers for an optimal experience when gaming or creating content.Using with AirPods MaxConnect your AirPods Max to the audio-out port on an aeroplane, on a Mac or on another device.Using with iPhone or iPadConnect your iOS or iPadOS device to the audio-in port on your car stereo or other speaker system, as well as Beats headphones with 3.5mm input.