7 m CAT6a Patch Cable | Shielded (STP) | Snagless | 100% Copper Wire | BlackThis CAT6a Ethernet cable meets all Category 6a cable specifications. It ensures reliable 10Gb connections between your network devices.Shield Your NetworkTested for up to 500MHz frequency, each CAT6a cable is more than suitable for 10GBase-T Ethernet networks.Built for quality performance, the cable features 100% copper and foil-shielded, twisted-pair wiring. The cable is designed to keep the data signals traveling through your network free from noise and interference. It's perfect in environments that are prone to large amounts of electromagnetic interference (EMI/RFI).Protect Your EquipmentThis CAT6a patch cable is built using 100% copper wire and is tested to comply with ANSI/TIA 568 C.2 Category 6a requirements. We don’t use copper-clad aluminum (CCA) wire which is subject to problems like weak power delivery, heat buildup, equipment damage and possibly fire.The 50-micron gold connectors deliver optimum conductivity and eliminate signal loss due to oxidation or corrosion.Easily Install Your Network CablesFor trouble-free cable runs, this durable cable features snagless connectors that protect the RJ45 clips during installation, making them less likely to snag or break.The CAT6a Ethernet cable also features moulded boots which offer strain relief by stopping the RJ45 connectors from bending at sharp angles. This reduces the risk of cable damage, which could decrease network connectivity and performance.6ASPAT7MBK is backed by StarTech.com’s lifetime warranty for guaranteed reliability.The StarTech.com Advantage

USB Cable, Type A, 18 cm

Cisco® multi-head cables provide flexibility and pleasing aesthetics in meeting rooms, and hassle-free content sharing for the user. The cables can connect a wide range of laptops to video-conferencing systems without the hassle of using multiple dongles. They clean up the meeting space with a sleek single-cable design while ensuring the quality of the signal over a 29.5-foot range. And users don’t need to worry about bringing the right dongles to the meetings. The multi-head cables support audio and video from a laptop to Cisco video-conferencing systems via HDMI.

USB-A or USB-C to USB-C cable. Connect and charge your Jabra USB-C wireless headset from a USB-A or USB-C enabled device.

The Vertiv Geist FSC is designed to mate with the Universal Input on the Vertiv Geist UPDU. The FSC is available in common worldwide AC power specs ranging from 16A-60A, 120V-415V with single and three phase power configurations. The flexibility offered by the UPDU and FSC enable any rack architecture to be installed around the world, regardless of the power infrastructure in place. Select the FSC specific to the local power configuration to power the UPDU. (UPDU sold separately)

Multi-head Cable (4K, USB-C, HDMI, miniDP)

The Cisco StackPower cables are thick but flexible, and they carry power as well as a data signal to provide a communications channel among the switches in the power stack. StackPower and XPS cables are keyed and have colored bands on the ends to help you understand what cable plugs into what switch or XPS.A StackPower cable has colors bands on the cable ends, green on one end and yellow on the other end. This cable can be used between Catalyst 3750-X switches and an XPS. Note that the connector with the blue band can only connect into a Catalyst 3750-X switch while the connector with the yellow band can connect to a Catalyst 3750-X or an XPS.An XPS cable has a color band on the cable ends as well, red on one end and yellow on the other end. This cable can only be used to connect Catalyst 3750-X or 3560-X switch to an XPS. Note that the connector with the red band can only connect to an XPS while the connector with the green and blue band can connect to Catalyst 3750-X or 3560-X switch.The Cisco Catalyst 3750-X Series Switches come with four power supply options and any of them can be used on any switch in a stack and in any combination.

The Cisco® 25GBASE SFP28 (Small Form-Factor Pluggable) portfolio offers customers a wide variety of high-density and low-power 25 Gigabit Ethernet connectivity options for data center and high-performance computing networks applications. The 25G Modules are based on SFP28 form factor

Crossover and straight-through cables are used in order to connect switch ports or interfaces to network devices. Consult this table in order to see when to use each of these cable types. Find the device in the left-hand column and match it up with another device in the top row. The intersection of these two devices gives you the cable type used to connect them together.