The Allied Telesis AT-GS950/48 eco-friendly WebSmart switch upholds the Allied Telesis commitment to environmentally friendly processes and products. It is designed to minimize power consumption through the use of a high-efficiency power supply and a low power chipset. The AT-GS950/48 features 48 x 10/100/1000T ports and an additional four Gigabit SFP combo ports. This WebSmart switch integrates the simplicity of unmanaged switches with the performance and reliability of managed switches to provide a cost-effective solution for users to integrate management at the edge of their network. The AT-GS950/48 provides key features using the simple web-based management function, such as port-based VLANs, IEEE 802.1p QoS, port trunking/link aggregation, port mirroring, priority queues, and IEEE 802.1x security support.

Our media converters allow you to connect disparate cable types in your network. Media conversion offers you the ability to:-Extend network distances by adding fiber only where it is needed.-Add new devices without replacing costly cable.-Keep pace with changing technology.-Integrate high-bandwidth devices into the network.

FS710 series- 802.1x auth with EAPOL passthrough When 802.1x authentication is executed, EAPOL packets is sent from supplicant.However if the switch does not support EAPOL passthrough, EAPOL and EAP packets is forwarded to Authenticator. As a result, authentication does not start.FS710 series supports EAPOL passthrough, so it is suitable as HUB when using 802.1x auth with EAP.

The Allied Telesis GS920/8 is an 8-port 10/100/1000T unmanaged DIP switch with internal PSU, offering secure, unmanaged Gigabit switching for the desktop and small networks.

Overview The FS710 Series switches provide silent operation, with easy set-up and simple connectivity for desktop and small to medium network environments.High performance Full auto-negotiating 10/100 ports allow FS710 switches to detect the speed and duplex modes of attached devices, and automatically configure for the best possible performance.Quality and reliability Allied Telesis is a world-wide leader in unmanaged Ethernet switches. Shipping more than 250,000 unmanaged switches every year, Allied Telesis offers proven reliability, and industry-recognized quality.Flexibility Available in 5, 8, 16 and 24-port models, the FS710 Series provide both internal and external power supply options. Wall, desk and rack-mounting options give users ultimate flexibility in selecting the model that meets their specific physical deployment requirements.Fanless for silent operation The FS710 Series are fanless and run silently, making them ideal for the desktop or workspace. Deploy in dusty industrial environments without affecting the expected lifetime.Simplified installation Auto-configuration of the FS710 Series minimizes user set-up. Auto-sensing ports enable seamless and simple connectivity between existing 10Mbps Ethernet and 100Mbps Fast Ethernet UTP devices, so installation takes just minutes. All ports support MDI/MDI-X simple connection to other hubs and switches. Environmentally friendly FS710 Series eco-friendly switches conform to the Allied Telesis commitment to environmentallyfriendly processes and products. They are designed to minimize power consumption through the use of a high-efficiency power supply and a low-power chipset. With low power consumption and a reduction in power outside regular work hours, as well as other powersaving features included as standard, the Allied Telesis FS710 Series truly lives up to its eco-friendly reputation. Not only does this help the planet by reducing the carbon footprint of each switch, it also lowers the Total Cost of Ownership (TCO) for the user. The device costs less to run, and features improved reliability

The AT-SPSX/SC and SPFX/SC are “first of their kind” optics, allowing the SFP to use an SC fiber connector. This unique feature allows many current networks that use SC fiber terminations, to connect to any device (for example, media converters, switches etc.) that have an available SFP port, without the need to change to LC connectors.

Fibre connectionsThe Allied Telesyn range of Fast Ethernet Media converters provides a complete family of conversion devices, allowing users to extend the size of UTP networks with the use of fibre cabling. Supporting both SC and ST fibre connectors, these converters can be used to extend networks with up to 2km of fibre.Auto-negotiation and MissingLink™ The MissingLink™ feature enables the fibre optic ports on the media converter to pass the ‘Link’ status of their connections to eachother. When the media converter detects a problem with one of the ports, such as the loss of connection to an end-node, the media converter shuts down the connection to the other port, thus notifying the node that the connection has been lost.Simple installation Both media converters feature an internal MDI/MDI-X switch, allowing the converter to be connected to either a PC, hub or switchwith a simple UTP cable.The media converters also allow the installer to test the integrity of fibre connection, by forcing the converters to communicate over the fibre cable.This ‘Link Test’ feature allows installers to check for cable faults without the need for expensive fibre-optic test equipment.Standalone or rackmounted Each small media converter is powered by an external power supply unit for use in standalone applications.Where multiple media converters are being used, up to 12 standalone devices can be inserted into a lowcost rackmount chassis, allowing all the converters to be powered by a single internal power supply. In critical applications, a secondload sharing internal power supply can be installed into the rackmount chassis.

The Allied Telesis CentreCOM® GS970M/18PS Layer 3 managed switch features sixteen 10/100/1000T Gigabit Ethernet ports and two 100/1000X SFP ports for secure connectivity at the network edge.

The Allied Telesis CentreCOM GS980M/52 managed switch features 48 x 10/100/1000T copper ports and 4 x 100/1000X SFP uplinks. A comprehensive feature-set, and built in security, make it ideal for high-density user and device connectivity at the network edge.OverviewAllied Telesis GS980M Series switches provide an excellent access solution for today’s networks, supporting Gigabit to the desktop for maximum performance. Deploying the GS980M as an AMF edge node when an AMF Master switch is available in the network, helps reduce network running costs by automating and simplifying many day-to-day administration tasks. 48 Gigabit ports and 4 SFP uplinks enable high-density and secure connectivity at the network edge, and the PoE+ model can supply up to 30 Watts to powered end-points.

Stackable Intelligent Layer 3 SwitchThe Allied Telesis x530L-52GPX stackable Layer 3 switch features high capacity, resiliency and easy management, making it the ideal choice for network access applications.OverviewThe Allied Telesis x530L-52GPX is a high-performing and feature-rich choice for today’s networks, featuring 48 Gigabit ports and 4 x 10 Gigabit uplinks. Combined with the ability to stack multiple units, the x530L-52GPX provides a versatile solution for enterprise applications.Powerful network managementAllied Telesis Autonomous Management Framework™ (AMF) automates many everyday tasks including configuration management, easing the workload of modern networks. The entire network can be managed as a single virtual device with powerful centralized features. Growing the network can be accomplished with plug-and-play simplicity, and network node recovery is fully zero-touch.AMF secure mode increases network security with management traffic encryption, authorization and monitoring. AMF Guestnode allows third-party devices, such as IP phones and security cameras, to be part of the AMF network.Network resiliencyToday’s converging online services means there is increasing demand for highly-available networks with minimal downtime. Allied Telesis VCStack™, in conjunction with link aggregation, provides a network with no single point of failure and application resiliency.x530L-52GPX switches can form a VCStack of up to 4 units for enhanced resiliency and simplified device management. Mixed stacking allows the x530L-52GPX to stack with x530 Series Switches. Long Distance Stacking (VCStack LD), which enables stacks to be created over long distance fiber links, makes the x530L-52GPX the perfect choice for distributed environments too.Allied Telesis Ethernet Protection Switched Ring (EPSRing™), and the standards-based G.8032 Ethernet Ring Protection, ensure that distributed network segments have high-speed, resilient access to online resources and applications.ReliableThe x530L-52GPX was designed with reliability in mind, and guarantees continual delivery of essential services. With dual built-in power supplies and near-hitless online stack reconfiguration, maintenance can be performed without affecting network uptime.SecureA secure network environment is guaranteed. The x530L-52GPX offers powerful control over network traffic types, secure management options, loop guard to protect against cabling mistakes, and tri-authentication for comprehensive access control.Future proofThe x530L-52GPX ensures a future-proof network, with superior flexibility and the ability to stack multiple units. All x530L-52GPX models feature 10 Gigabit uplink ports and a comprehensive IPv6 feature set, to ensure they are ready for future network traffic demands.Environmentally friendlyThe x530L-52GPX supports Energy Efficient Ethernet (EEE), automatically reducing the power consumed by the switch whenever there is no traffic on a port. This sophisticated feature significantly lowers operating costs by reducing the power requirements of the switch and any associated cooling equipment